Brocade Communications Systems IP250 Add Report Definitions dialog box, Time Settings tab

33 IP sFlow configuration

16.Decide if you want to enter the user names in the fields provided, or if you want to be prompted for the user names.

-If you want to be prompted, select the Prompt check box. This disables the field.

-If you do not want to be prompted, enter the name of the user that is sending the traffic in the Source User field, and enter the name of the user that is receiving the traffic in the Destination User field.

17.Select the Routing tab.

FIGURE 430 Add Report Definitions dialog box, Routing tab

18.Examine each listed item and decide the following:

Do you want to enter values in the field, or be prompted to enter the value when running the report? If you want to be prompted, select the Prompt check box.

If you do not chose the Prompt check box, you may enter any of the following in the fields provided:

-Source Subnet Bits - Enter the source subnet of the route.

-Destination Subnet Bits - Enter the destination subnet of the route.

-Local AS - Enter the local AS number.

-Source AS - Enter the destination AS number.

-Source Peer AS -Enter a source peer AS number.

-AS Paths - Enter an AS path number.

-Flow Label - Enter a flow label.

19.Select the Time Settings tab.

FIGURE 431 Add Report Definitions dialog box, Time Settings tab

1030	Brocade Network Advisor IP User Manual
	53-1003056-01