Playback mode
Playback mode
Playing back tape
≥Set to Tape Playback Mode.
(An operation icon automatically appears on the LCD monitor.)
PC
1Operate with joystick.
1/;: Playback/Pause
6: Rewind/Review playback (Reverts to playback with the 1/; icon.)
5: Fast forward/Cue playback (Reverts to playback with the 1/; icon.)
∫: Stop
≥The power will not turn off when the LCD monitor and the viewfinder are closed and retracted during Tape playback mode.
≥During cue/review playback,
≥Before and after cue/review playback, the screen may become blue for a moment or images may be disturbed.
ªTo adjust volume
Adjust the speaker volume for playback.
1Move the [s
/VOLr] lever to adjust the volume.
VOL 
Towards [r]: increases the volume
Towards [`]: decreases the volume
(The nearer the bar is to [r], the higher the volume.)
≥When the adjustment is completed, the volume indication will disappear.
≥If you do not hear the sound, check the settings of [SETUP] >> [12bit AUDIO].
ªRepeat playback
When the tape end is reached, the tape will be rewound and played back again.
1Set [ADVANCED] >> [REPEAT PLAY] >> [ON].
≥The [
] indication appears. (In order to cancel the repeat playback mode, set [REPEAT PLAY] >> [OFF] or turn off the power.)
ªSettings on the audio
≥If you cannot listen to the desired audio when playing back a tape, check the settings in [SETUP] >> [12bit AUDIO].
≥When you record the audio in [12bit] and set [SETUP] >> [12bit AUDIO] >> [MIX], the audio will be played back in stereo sound regardless of the settings in [AUDIO OUT].
40
LSQT1121
