Playback mode

Frame-by-frame playback

Set to Tape Playback Mode.

1During playback, move the joystick up to select the [1/;] icon to pause playback.

2Push the [s /VOLr] lever.

VOL

Towards [T]: normal direction

Towards [W]: reversed direction

If you keep pushing the lever, then the images

will continuously be played back frame by frame.

The pause icon appears for an instant. Continuous frame-by-frame playback will start after the pause icon disappears.

ªTo return to normal playback

Move the joystick up to select the [1/;] icon to start playback.

Playback on TV

Images recorded by this Camcorder can be played back on a TV.

Insert a recorded tape or card into this

Camcorder.

Be sure that the power of the unit is turned off before connecting it to a TV.

1Connect the Camcorder and a TV.

[VIDEO IN]

[AUDIO IN]

A/V

1

Connect the Camcorder and a TV by using the AV cable 1.

2Turn on this Camcorder and set the mode dial to the Tape Playback Mode (or Card Playback Mode).

3Select the input channel on the TV.

If the images are not played back correctly on the TV (e.g. they are displayed vertically), perform the menu operations in accordance with the aspect ratio of the TV monitor.

Set [SETUP] >> [TV ASPECT] >> [16:9] or [4:3].

4Move the joystick up to select the [1/;] icon to start playback.

The image and audio are output on the TV.

5Move the joystick down to select the [] icon to stop playback.

Use the AC adaptor to free you from worrying about the battery running down.

ªIf the image or audio from this

Camcorder is not output on the TV

Check that the plugs are inserted as far as they go.

Check the [12bit AUDIO] settings. (-58-) Check the connected terminal.

Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)

41

LSQT1121

Page 41
Image 41
Panasonic PV-GS80 operating instructions Frame-by-frame playback, Playback on TV, To return to normal playback