KTI Networks KSD-800M

-62-

5.4.7 Update Firmware

This menu is used to perform firmware (switch software) upgrade via TFTP protocol. Before doing

TFTP operation, one TFTP server must be available in the network to where this switch is connected

and the new firmware file image.bin is placed in the server.

Settings Description

TFTP Server IP Address Specify the IP address of the TFTP server

Firmware File Name Specify the file name of the new firmware

Apply Button to confirm the settings

5.4.8 Restore Default

This menu is used to restore all settings of the switch with factory default values. Note that this menu

might change the current IP address of the switch and make your current http connection lost.

5.4.9 Reboot System

This menu is used to reboot the switch unit with current configuration remotely. Starting this menu will

make your current http connection lost. You must rebuild the connection to perform any management

operation to the unit.

Contents

Main Page Page Table of Contents Appendix. Factory Default Settings ..............................................................64 1. Introduction n n n n n n 1.1 Features Page Page 1.5 LED Indicators 1.6 Top Panel 1.7 Specifications Page Page 1.8 Model Definitions Page 2. Installation 2.1 Unpacking 2.2 Safety Cautions 2.3 DIN-Rail Mounting Page Page 2.5 Applying Power 2.6 Power Failure Relay Output 2.7 Reset Button 2.8 Making UTP Connections 2.9 Making Fiber Connections 2.10 LED Indication 2.11 Configuring IP Address for the Switch Default 2.12 Configuring User Name and Password 2.13 Configuring SNMP Settings 3. Advanced Functions 3.1 QoS Function 3.1.1 Priority Level 3.1.2 Egress Service Policy 3.1.3 Packet Priority Classification 3.1.3.1 Port-based Priority Setting (per port setting) 3.1.3.2 802.1p Classification (per port setting) 3.1.3.3 DSCP Classification (per port setting) 3.1.3.4 IP Network Address Classification 3.1.4 Other QoS Settings 3.2 VLAN Function 3.2.1 VLAN Operation 3.2.2 Ingress Rules 3.2.2.1 802.1Q Tag Aware VLAN Mode (global setting) 3.2.2.2 Ingress Member Filtering (global setting) 3.2.2.3 Unmatched VID Filtering (per port setting) 3.2.3 VLAN Group Mapping 3.2.4 Packet Forwarding under VLAN 3.2.5 Egress Tagging Rules 3.2.5.1 Egress Tag Rule (per port setting) 3.2.5.2 Null VID Replacement (per port setting) 3.2.6 Summary of VLAN Function 4. Software Management 4.1 Telnet Management Interface 4.2 IP Menu 4.3 SNMP Menu 4.4 Port Config 4.5 Administrator 4.5.1 Administrator -> VLAN Settings Page Page Page 4.5.2 Administrator -> QoS Settings Page Page 4.6 Restore Default Values 4.7 Security Manager 4.8 Update Firmware 4.9 Reboot System 4.10 Exit 5. Web Management 5.1 Start Browser Software and Making Connection 5.2 Login to the Switch Unit Page 5.3 Port Status Menu 5.4 Administrator 5.4.1 Basic Menu Page Page 5.4.2 Port Controls 5.4.3 VLAN Controls Page Page Page Page 5.4.4 QoS Controls Page Page Page Page 6. SNMP Management 6.1 MIB Objects 6.2 SNMP Traps Appendix. Factory Default Settings