KTI Networks KSD-800M manual Software Management, Telnet Management Interface, Main Menu

4. Software Management

The switch provides the following in-band management interfaces for configuring the switch to meet requirements for different applications:

•Telnet over TCP/IP

•Http web-based over TCP/IP

•SNMP over TCP/IP

4.1 Telnet Management Interface

Use Telnet software to perform the management operation. The most convenient solution is using the built-in Telnet function in your Windows PC. Execute Telnet command as follows:

>telnet xxx.xxx.xxx.xxx

The specified xxx.xxx.xxx.xxx is the IP address of the switch. Factory default IP address is 192.168.0.2.

A welcome message and login prompt are displayed if the connection is established properly.

Welcome to Telnet Server

login:xxxxx password: xxx Welcome xxxxx

Factory default login name : admin

Factory default password : 123

It is suggested to change the user name and password first before performing other configuration. To change the user name and password, select [6] Security Manager for configuration.

Main Menu

INET>

Setup Menu

TCP/IP stack v1.0

[0]Print this menu

[1]IP Menu

[2]SNMP Menu

[3]Port Config

[4]Administrator

[5]Restore Default Values

[6]Security Manager

[7]Update firmware

[8]Reboot System

[Q] Exit

Please Select(0-9)....

Note: If [Unchange] option is provided during configuration, it means keeping current setting.

-33-