KTI Networks KSD-800M manual Port Config, Status Description

4.4 Port Config

Select [3] Port Config to configure port configuration.

Port Config Menu:

[0]Print this menu

[1]Port Status

[2]Port Config [Q] Back Menu Please Select(0-3)

Select [1] Port Status to view current port status for all ports as example below:

INET> Port Status:
Port	Port Link		Auto	Speed	Duplex Port		Auto_No	Speed		Duplex
+-----	+----	+------	+--------	+------	+------	+--------	+--------	+-------		+-------	+
1	TP	Down	--	--	--	Enable	Enable	100	M	Full
2	TP	Down	--	--	--	Enable	Enable	100	M	Full
3	TP	Down	--	--	--	Enable	Enable	100	M	Full
4	TP	Down	--	--	--	Enable	Enable	100	M	Full
5	TP	Down	--	--	--	Enable	Enable	100	M	Full
6	TP	Up	Enable	100 M	Full	Enable	Enable	100 M		Full
7	TP	Down	--	--	--	Enable	Enable	100	M	Full
8	TP	Down	--	--	--	Enable	Enable	100	M	Full
+-----	+----	+------	+--------	+------	+------	+--------	+--------	+-------		+-------	+
INET>

Status	Description
Port	The port number
Port Type	TP - 10/100TX port (for Port 7 and Port 8 10/100TX is selected)
	FX - 100FX is selected (for Port 7 and Port 8 only)
Link Status	Port link status
	Down - port link down (no status is displayed.)
	Up - port link up
Auto Negotia.	Auto-negotiation configuration
	Enable - auto-negotiation is enabled
	Disable - auto-negotiation is disabled (forced mode is used)
Speed Status	Port speed status
	100M - 100Mbps is used
	10M - 10Mbps is used
Duplex Status	Port duplex status
	Full - full duplex is used
	Half - half duplex is used
Port Control	Port function configuration
	Enable - Port function (Tx/Rx) is enabled
	Disable - Port function (Tx/Rx) is disabled
Auto-No Control	Port auto-negotiation function
	Enable - enable port auto-negotiation
	Disable - disable port auto-negotiation (use forced mode)

-36-