Technicolor - Thomson 545/570 manual Connecting Wireless Clients

Models: 545/570

1 98
Download 98 pages 12.16 Kb
Page 47
Image 47
4.2 Connecting Wireless Clients

4 Wireless Connectivity

4.2 Connecting Wireless Clients

Before you connect In case the SpeedTouch™ has not been configured before (the SpeedTouch™ is still in other wireless clients its default configuration), it is recommended to proceed first with the configuration

setup procedures as described in “1.3 SpeedTouch™ Configuration Setup” on page 11.

For enhanced security, after going through the SpeedTouch™ configuration setup procedures, you are able to “personalize” the SpeedTouch™ wireless access point settings by configuring another SSID, and/or optionally another security level.

For more information on the configuration of the SpeedTouch™ Wireless configura- tion, see “ Wireless” on page 52.

Preconditions Make sure that:

The SpeedTouch™ is powered on and ready for service.

The SpeedTouch™ has been configured by the SpeedTouch™ Setup wizard or via uploading the appropriate configuration profile file.

Optionally, the SpeedTouch™ wireless settings have been personalized.

Further make sure that:

The wireless client adapters are installed on the computers you want to connect. Depending on the personalized wireless settings:

In case WEP encryption is enabled on the SpeedTouch™, you must configure the wireless client to use the same encryption level and WEP key.

In case SSID broadcasting is disabled, you must configure the wireless client for the SpeedTouch™ SSID.

Depending on the registration button and Access Control List configuration:

In case registration is disabled and the Access Control List unlocked, no further actions are needed for the wireless client to access the Speed- Touch™ WLAN.

In case registration is disabled and the Access Control List locked, you must manually add the wireless client to the Access Control List as described in “ Wireless” on page 52. Make sure to save your SpeedTouch™ configuration by clicking Save all.

In case registration is enabled and the Access Control List locked, you must follow the procedure below to register the WLAN client to the Speed- Touch™ Access Control List.

E-DOC-CTC-20030814-0001 v1.0

45

 

Page 47
Image 47
Technicolor - Thomson 545/570 manual Connecting Wireless Clients