1 SpeedTouch™ Installation
Configuration of the SpeedTouch™
Proceed as follows:
1Open a web browser and browse to the SpeedTouch™ web pages at http://10.0.0.138. See “5 SpeedTouch™ Web Interface” on page 47 for more information.
Note If you can not access the SpeedTouch™ web pages, it is probably not in its default state. It is recommended to reset the device.
2The embedded Easy Setup wizard will appear automatically:
Click Next.
Note If Easy Setup doesn’t start automatically go to
Advanced > Easy Setup.
3The following window invites you to select the appropriate Service for your inter- net connectivity:
In the Service list, select the Service as specified by your Service Provider and click Next to continue.
Note If only one Service is available, this window will not be shown.
4Subsequent screens will guide you through the configuration setup of the Speed- Touch™. Follow the instructions and enter the required information whenever needed. The requested information will depend on the selected Service profile and should be provided by your Service Provider.
Click Next whenever requested.
20 | |
|
