Technicolor - Thomson 545/570 manual

5 SpeedTouch™ Web Interface

•Back up the current SpeedTouch™ configuration, restore the SpeedTouch™ default configuration, or upload a backup configuration file:

•To backup the current configuration click Backup and follow the instructions.

•To restore the SpeedTouch™ defaults:

1Click Restore default to load the default configuration.

2The SpeedTouch™ prompts you to confirm the reset to defaults. Click Yes to load the default configuration

3The SpeedTouch™ is now in its default configuration.

•To upload and apply a SpeedTouch™ backup configuration file:

1Click Browse to locate the backup file on your local disk you intend to restore. Select the file and click OK.

2Click Upload to upload and apply the backup configuration.

3Once uploaded, the SpeedTouch™ asks you to confirm that you want the SpeedTouch™ to effectively apply the uploaded configuration. Click Accept to save the new configuration.

System Password Click this link to display the System Password page.

This page allows you to configure a system password to restrict access to the Speed- Touch™:

It is highly recommended to configure a system password, to protect the Speed- Touch™. Make sure however not to use an obvious password such as your name, date of birth, etc.

Enter User id and Password (maximum 16 characters) of your choice and re-enter your password in the appropriate field. Click Apply to apply the System password and Save all to save your changes to persistent memory.

Note As long as no system password is supplied, a warning is displayed on the SpeedTouch™ web pages.

E-DOC-CTC-20030814-0001 v1.0 65