5 SpeedTouch™ Web Interface
5 SpeedTouch™ Web Interface
Introduction
Preconditions
Use of the SpeedTouch™ web interface
Access to the SpeedTouch™ web interface
Access to the SpeedTouch™ web interface via UPnP™
The SpeedTouch™ comes with integrated local configuration capabilities.
The local configuration, via the SpeedTouch™ web interface, is based on the HTTP server/web browser concept.
It allows you to configure your SpeedTouch™ via a web browser using HTML pages from any local computer attached to the SpeedTouch™ (Wireless) LAN.
Before accessing the SpeedTouch™ web pages, make sure that either:
•Your Web browser is not using a proxy server.
•The SpeedTouch™ IP address is not submitted to a proxy server.
For more information on how to disable your web browser's proxying, please consult the web browser's user's guide.
In most cases, the SpeedTouch™ is correctly configured for your Internet connectivity via the Service you selected during SpeedTouch™ Configuration Setup, implying that no further configuration on the web interface is needed.
To access the SpeedTouch™ web pages:
1Start the web browser on your computer.
2Browse to the SpeedTouch™ at the SpeedTouch™’s IP address (in most cases 10.0.0.138).
3If a system password has been set, an authentication window will be displayed. You must enter the user name and system password before access will be granted.
If your computer is UPnP™ enabled you can access the pages as follows:
1Click (Settings >) Control Panel on the Start menu to open the Control Panel.
2Go to Network and Internet Connections > My Network Places.
Note If you use the Control Panel in Classic View, click Network Connections in the Control Panel and Network Places under Other Places.
3The following window appears:
4If a system password has been set, an authentication window will be displayed. Enter user name and system password in the appropriate fields and click OK.
47 | |
|
