5 SpeedTouch™ Web Interface
•Define a default server:
By specifying a default server IP address (e.g. 10.0.0.154 as shown above), all incoming connections that don’t match a specifically configured static NAPT entry will be forwarded to the device with this IP address. This setting should be adequate for most server applications and eliminates the need for specific static NAPT entries.
•Configure UPnP™:
The three UPnP™ configurations are:
•Full:
The SpeedTouch™ is UPnP™ enabled, all local hosts are able to detect the SpeedTouch™. Any local host is able to create port mappings for any local device.
•Secure:
The SpeedTouch™ is UPnP™ enabled, all local hosts are able to detect the SpeedTouch™. A local host is allowed to make port mappings for its own, i.e. a local host is not allowed to create port mappings for other local devices.
•Off:
The SpeedTouch™ is UPnP™ disabled, none of the local hosts is able to detect the SpeedTouch™. Via UPnP™ no port mappings can be created.
60 | |
|
