1 SpeedTouch™ Installation
1.3 SpeedTouch™ Configuration Setup
Internet connectivity Some configuration may be required to prepare the SpeedTouch™ for Internet connec- tivity.
Before setting up the SpeedTouch™ for Internet connectivity, make sure that the SpeedTouch™ is prepared as described in “1.2 Setting Up the SpeedTouch™” on page 9.
You can configure the SpeedTouch™:
•Over the traditional wired Ethernet network
•Over the SpeedTouch™ wireless Ethernet network
If you want to configure the SpeedTouch™ over the wireless interface, make sure that your computer’s WLAN client is correctly associated with the SpeedTouch™ wireless network according to “4.1
What you need from You might need a user account with an Internet Service Provider (ISP) for Internet your ISP access. For this user account, your ISP will provide you with:
•A user name (logon ID).
•A password.
Other information may be required, depending on the ISP’s specific requirements and
Service profile selection.
SpeedTouch™ The method for configuring the SpeedTouch™ via the Setup configuration files depends configuration options on the Operating System (OS) of your computer system.
If your computer system runs:
•A Microsoft Windows Operating System:
The SpeedTouch™ Setup wizard, included on the SpeedTouch™ Setup
Proceed with “1.3.1 Microsoft Windows SpeedTouch™ Configuration Setup” on page 12.
In addition it is recommended to install Dr SpeedTouch™. See “3 Dr SpeedTouch™” on page 37 for more information.
•Another Operating System (e.g. Apple Mac OS, UNIX, Linux, etc.):
The SpeedTouch™ Embedded Easy Setup wizard, accessible from the Speed- Touch™ web pages, will automatically guide you through the configuration of the SpeedTouch™.
Proceed with “1.3.2 Operating System Independent SpeedTouch™ Configuration Setup” on page 19.
11 | |
|
