7 Support
7.3.3Upgrade via the SpeedTouch™ Upgrade Wizard
Introduction The procedure described in this section are valid only in case:
•You run an MS Windows Operating System.
•Your SpeedTouch™ and computer are connected through a wired network.
•The new system software file is of the type
During the upgrade procedure all configuration settings are backed up by the wizard and restored after uploading the system software. Therefore, you do not need to back up the SpeedTouch™ configuration yourself.
Upgrade procedure Proceed as follows:
1Insert the SpeedTouch™ Setup
Note If the SpeedTouch™ CD Browser window does not appear automati- cally, click Run on the Start menu and enter the following path: D:\Menu.exe where D stands for the drive letter of your
2The choose language window prompts you to select a language:
Select your language and click OK.
3The SpeedTouch™ CD Browser menu appears:
Click Diagnostics & Maintenance.
81 | |
|