Sony KDP-51WS655, KDP-57WS655 Adjusting the Convergence Manually, Press Menu to display the Menu

Adjusting the Convergence Manually

zFor details on using the Setup Menu, see page 94.

The Convergence feature gives you more control over the picture’s convergence than the Flash Focus feature, allowing you to fine-tune the convergence.

✍Before adjusting the convergence manually for the first time, you must first perform Flash Focus (as described on page 44). Allow the TV to warm up for about 30 minutes before you adjust the convergence.

1	Press MENU to display the Menu.		Setup
2	Press V or v to highlight the Setup icon and press	.
3	Press V or v to highlight Convergence and press	.
	A pattern of white crosses appears, with a yellow	around one
	of the crosses. Aligned crosses (which do not need adjustment)
	look white and have little or no red or blue showing. Crosses that
	are not aligned show red or blue shades beyond their edges.
			SETUP

		-	--	-
Full/Normal				SETUP
<	<	Select:		End: Menu
Move: <<

	You can scroll up and down through the 9 x 7 field of crosses to			SETUP
	manually converge all portions of the screen.
4	Move the	to surround a cross that you want to adjust. Press
	. The	changes to red.
5	If the cross that you selected has red edges, move until the red
	image is replaced with a white cross. Once you have finished this
	(or the cross does not have red edges), press		. The changes
	to blue.
6	If the cross you selected has blue edges, move until the blue			SETUP
	image is replaced with a white cross. Once you have finished this,
	press	. The changes to yellow again.
7	Repeat steps 4 to 6 to adjust other crosses. When finished, press
	MENU to exit the Setup Menu.

45