Cable Box and
Cable Only
Before connecting a cable box, see “About Using CableCARD” on page 17.
Setup
SETUP
For best results, use this connection if:
❑Your cable company scrambles some channels, such as premium channels (which requires you to use a cable box), but does not scramble all channels.
❑You do not have a VCR. (If you have a VCR, see pages 24 and 26.)
With this connection you can:
❑Use the TV remote control to change channels coming through the cable box to the TV’s VHF/UHF input jack. (You must first program the remote control for your specific cable box; see “Programming the Remote Control” on page 50.)
❑Use the TV remote control to change channels coming directly into the TV’s CABLE input. (The TV’s tuner provides a better signal than the cable box.)
Notes on Using This Connection
To Do This ... | Do This ... |
Use the cable box | Tune the TV to the channel the cable box is set to (usually channel 3 or 4) |
| and then use the cable box to switch channels. |
|
|
Set up the TV remote control | Program the remote control. See “Programming the Remote Control” on |
to operate the cable box | pages |
|
|
Activate the remote control to | Press SAT/CABLE FUNCTION. |
operate the cable box |
|
Switch the TV’s input between the cable box and cable
Press ANT to switch back and forth between the TV’s VHF/UHF (scrambled channels) and CABLE (unscrambled) inputs.
20
