Adjusting the Convergence Automatically (Flash Focus)
Setup
zYou can also access Flash Focus in the Setup Menu. For details, see page 95.
The projection tube image appears on the screen in three colors (red, green and blue). If the three colors do not project properly, the color is poor and the picture blurs. Before you use your TV, be sure to run the Flash Focus feature. Flash Focus adjusts the color projection settings automatically.
✍Allow the TV to warm up for about 30 minutes before you adjust the convergence with Flash Focus.
1Tune to a TV or cable TV program.
2Press the FLASH FOCUS button on the front panel of the TV (see page 14).
The cross pattern appears and Flash Focus begins to work.
SETUP
, |
The adjustment is completed when the TV picture returns.
To Perform Additional Fine Manual Adjustments
Use the manual Convergence feature, described on page 45.
Notes on Flash Focus
❑You cannot perform any other functions until Flash Focus has completed its cycle. If you perform any other operation while Flash Focus is in progress, the Flash Focus operation is canceled.
44
