Crate Amplifiers TX50D manual Technical Specifications, C R A T E

C R A T E

TECHNICAL SPECIFICATIONS

OUTPUT POWER RATING		50W RMS @ 10% THD, 4 ohms, 13.6VDC in
INPUT IMPEDANCE		1M ohm
MAXIMUM SIGNAL ACCEPTED
Mic Low Z		2V peak to peak
Mic Hi Z		12V peak to peak
Instrument		12V peak to peak
GAIN	Mic	57dB High Z, 72dB Low Z
Instrument		44dB w/Gain switch out, Ch2
		85dB w/Gain switch in, Ch1
SENSITIVITY	Mic	3.5mV RMS High Z, 20mV RMS Low Z
Instrument		80mV RMS w/Gain switch out, Ch2
		.8mV RMS w/Gain switch in, Ch1
Line In Insert		400mV RMS
EQS, MIC	Low	±15dB @ 60Hz
	Mid	±15dB @ 600Hz
	High	±15dB @ 10kHz
EQS, INSTRUMENT	Low	12.5dB range @ 80Hz
	Mid	18dB range @ 800Hz
	High	18dB range @ 10kHz
	Shape	Crate proprietary circuit
INSERT JACK	Tip	Line In
	Ring	Line Out
	Sleeve	Ground
SPEAKERS	Woofer	Crate Custom Design 10”, 4 ohm, 100 watt
		1.5” voice coil, 16 oz magnet
Tweeter		2” Piezo , 4 ohm, 150 watt network
POWER REQUIREMENTS		Internal 12 volt DC power supply
		DC adapter for use with 120VAC
		Optional 12V vehicle lighter adapter
SIZE AND WEIGHT		15-1/2”W x 13”H x 12”D; 32 lbs.

The TX50D is covered with a durable Tolex® material. To keep the cabinet in top condition, wipe it clean with a damp, lint-free cloth to remove dirt and road film. Never spray cleaning agents directly onto the cabinet, and stay away from abra- sive cleansers which could damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason,

the specifications and information in this manual are subject to change without notice.

www.crateamps.com

©2001 SLM Electronics • A division of St. Louis Music

1400 Ferguson Avenue • St. Louis, MO 63133

P/N 47-099-03 • 061505