Crate Amplifiers TX50D manual Suggested SET-UPS

C R A T E

SUGGESTED SET-UPS:

The TX50D can be used in a variety of different ways, some of which are shown below and on the following page. Use these ideas to fuel your imagination for the setup which best suits your needs.

Idea 1 – Play and sing, with external effects and backup: Connect a micro- phone to the Low Z jack. Connect an instrument (acoustic or electric gui- tar, keyboard) to the Instrument Input jack. (This high-Z input works with all types of pickups, from Piezo to active types.) Connect a rhythm machine to the CD Input jacks. A two-button footswitch may be used to select Instrument Channel 1 or 2 and to turn the DSP on and off. Connect the external effects device to the Insert jack using one of the methods shown on page 8. (Note that the external effect will be applied equally to both channels, as well as the CD inputs, so use with discretion.)

MIC

INSTRUMENTEFFECTS (SM1-SP)

FOOTSWITCH
(CFP2)	RHYTHM MACHINE

LOW Z

INPUT

INSTRUMENT

INPUT

INSERT

CD

INPUT

FOOT

SWITCH

Idea 2 – Play along: Connect an instrument (acoustic or electric guitar, keyboard) to the Instrument Input jack. Connect a tape player or CD play- er to either the CD Input jacks or to the Low Z jack of the remaining channel. (See the notes on page 10 for more detailed infromation.) A pair of stereo headphones may be connected to the Headphones jack for pri- vacy.

INSTRUMENT

HEADPHONES

TAPE PLAYER

CD PLAYER

INSTRUMENT

INPUT

HI Z

INPUT

CD

INPUT

HEAD

PHONES

9