Mounting the IPI 201 or IPI 204 into an AAP Wall Plate or Device Faceplate
The IPI 201 and IPI 204 intercoms must be attached to a device faceplate or AAP wall plate and cabled before the device or wall plate is installed in a wall or furniture. Unlike the IPI 100 Series intercoms, the IPI 200 AAP Series intercoms are secured by attaching a clamp bracket to the back of the intercom after it has been inserted through the front of the AAP plate.
1.Before cables are attached, insert the IPI through the front of the device’s faceplate or AAP mounting frame. Secure the IPI to the faceplate/wall plate by attaching the provided clamp bracket.
Extron
IPI 204 AAP
Intercom
(rear view)Clamp Bracket (included)
2. Connect cables to the IPI. See “IPI Rear Panel Features and Cabling” on page
3. Mount the AAP mounting frame or other device to the wall, furniture, or rack panel. Follow any special mounting instructions that came with that device.
IPI 100 AAP, IPI 200 AAP Series • Installation |
