2.Locate the small corner notch on the lens cap and slide the screwdriver between the lens cap and the diffuser, as shown in Ç.
Using a rotating motion of the screwdriver (see É), carefully pry the two pieces apart.
3.Replace the label with the new button label.
4.Press the lens cap and diffuser together and reinstall the button assembly into its plunger/base.
5.Repeat steps 1 through 4 for each button you plan to re- label.
Plunger
Base
Clear Lens |
| É | Diffuser |
| Button Label | ||
|
| ||
| Ç | Pry the |
|
| pieces | . | |
|
| ||
|
| Notch |
|
Separating the two- piece button here the corner.
IPI 100 Series, IPI 200 Series • Installation |
