Manually by IP Address — To use this option, type the IP address of an intercom-equipped MLC 226 IP and IPI 201/204 series intercoms into the blank area to the right of this selection, then click the Add button. Repeat that process for each intercom system to add to the Intercom List.
Automatic — To add intercom-enabled MLCs and IPI 201/204 series intercoms to the list automatically, select the automatic option and click the Scan button. The software broadcasts a message to the network and adds the responding MLCs and IPI 201/204 series intercoms to the Intercom List. A scanning progress window appears during the scan.
B.Add IP addresses of intercom-enabled MLCs and IPI 201/204 series intercoms to the list.
•For manual entry, enter an MLC’s or IPI 201/204 series intercom’s IP address in the text box, click the Add button. Repeat this process for each intercom to be covered by this console.
•For automatic entry, click the Scan button. The console checks the network for IPI-enabled MLC and IPI 201/204 series units that are turned on and connected to the network. As shown in the following example, it adds the name and IP address of every connected unit to the list.
To remove specific units from the list, click on the device’s name and press the keyboard’s Delete key.
IPI 100 Series, IPI 200 Series • Configuration and Control 4-21
