Extron electronic IPI 200 Series manual Introduction, cont’d Features, System Requirements

Introduction, cont’d

Features

•Two-way, half-duplex voice communications over an IP network

•Compatibility with IP Intercom-enabled MLC 226 IP MediaLink Controllers (IPI 101 AAP and IPI 104 AAP)

•Backlit, configurable Push To Talk buttons

•Integrated speaker and microphone

•Three-position switch to adjust speaker volume levels (IPI 101 AAP and IPI 104 AAP only)

•LED indicator to show when the room is being monitored

•Four space and 2-gang Architectural Adapter Plate (AAP) opening mounting

•Connection via existing network cable drops (one drop per MLC-IPI pair, IPI 101 AAPs and IPI 104 AAPs, only)

System Requirements

The IP Intercom HelpDesk software is available at no charge via the Extron Web site (http://www.extron.com) or the CD that comes with your IPI. To install and run IP HelpDesk, you need a PC with the following things installed:

•Windows 2000 or Windows XP Professional

•Pentium 4, 2 GHz or faster microprocessor

•500 MB RAM, recommended (256 MB minimum)

•50 MB or more available hard disk space

•Windows-supported sound card, microphone, and speakers

•Microsoft Direct X version 9.0c or later

•Microsoft .NET framework, version 2.0 or later

•network card and a network connection

INTERCOM MIC ONINTERCOM MIC ON

PUSH TO TALK

HELP	ROOM	LAB	ADMIN		PUSH TO	HELP
DESK	101		OFFICE		TALK	DESK
1	2	3	4
CONFIG			IPI 204	CONFIG		IPI 201
INTERCOM				INTERCOM
			MIC ON			MIC ON
	PUSH TO TALK
HELP	ROOM	LAB	ADMIN		PUSH TO	HELP
DESK	101		OFFICE		TALK	DESK
1	2	3	4
CONFIG			IPI 204	CONFIG
Extron			IPI 204	Extron		IPI 201

1-4 IPI 100 Series, IPI 200 Series • Introduction