IPI 100 Series, IPI 200 Series • Programming and Control

5-15

Command ASCII (Telnet)
(host to intercom)
URL Encoded (Web)
(host to intercom)
Response
(intercom to host)

Additional

description

IP setup commands

Set the unit
name24
E X1@ CN}W X1@ CN|Ipn• X1@ ] Change the IPI’s name to
one of your choosing (X1@),
such as “AuditoriumIPI”,
“Rm316-AVcenter”, or
“exec-boardroom-ctrl”. The
name consists of up to 24
alphanumeric characters (and
the minus sign). The rst
character must be a letter,
the last character cannot be a
minus sign (hyphen). Case
does not matter.
Set unit name to
factory default24
E
•CN}W%20CN|Ipn•X4( ] X4( = the name the IPI
was shipped with: IPI 104
-##-##-##, a combination of
the model name and the last
3 pairs of hex numbers in the
controller’s MAC address
(e.g., IPI-104-IP-00- 02-3D).
Read the unit
name
E
CN}WCN| X1@ ] or X4( ] X1@ is the IPI’s current, user-
dened unit name.
X4( is the IPI’s factory
default name.