Extron electronic IPI 200 Series, IPI 100 Series manual X2@ , X6$,X1$ EB , Bmd X6$,X1$ , X6$ EB

5-20 IPI 100 Series, IPI 200 Series • Programming and Control

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional
	(host to intercom)	(host to intercom)	(intercom to host)	description
Read verbose	E CV }	WCV	X2@ ]
mode status
Set the broadcast	E X6$,X1$ EB }	W X6$%2C X1$ EB	Bmd X6$,X1$ ]	This command details how
mode24				often and to what subnet
				work the IPI broadcasts a
				message.
				X6$ = Broadcast repetition
				interval in seconds (0 to 255
				[4.25 minutes], default = 0 =
				off).
				X1$ = IP address (xxx.xxx.
				xxx.xxx). Leading zeros
				in each of four fields are
				optional in setting values,
				and they are suppressed in
				returned values.
				Default broadcast address:
				255.255.255.255.
Set the broadcast	E X6$ EB }	W X6$ EB	Bmd
mode to the			X6$,255.255.255.255]
default address24
Clear the	E 0 EB }	W 0 EB	Bmd 000,255.255.255.255]	This command sets the repeat
broadcast mode24				interval to zero, turning off
				the broadcast mode.
View the	E EB }	W EB	X6$,X1$ ]
broadcast mode

IPI 201/204 SIS™ Programming, cont’d