Extron electronic IPI 100 Series, IPI 200 Series manual X3$ CX, X1$ CI

IPI 100 Series, IPI 200 Series • Programming and Control

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional
	(host to intercom)	(host to intercom)	(intercom to host)	description
Set daylight	E X3$ CX}	WX3$ CX	Ipx X3$ ]
saving time24

X3$ = Daylight saving time (DST) is a region-specific 1-hour offset that begins in spring and ends in fall.

0 = off/ignore

1 = USA on – starts on the first Sunday of April at 2 am and ends on the last Sunday of October. For example, time in California is GMT -8:00 from April to October and GMT -7:00 from November to March. However, in 2007 DST starts on the second Sunday in March and ends the first Sunday in November. DST should be turned off in Hawaii, American Samoa, most equatorial regions, Guam, Puerto Rico, the Virgin Islands, the eastern time zone portion of the state of Indiana, and the state of Arizona (excluding the Navajo Nation).

2 = Europe on – begins on the last Sunday in March, ends on the last Sunday in October. DST should be turned off in Iceland.

3 = Brazil on – begins on the last Sunday in October, ends on the third Saturday in March. This varies from year to

	year.
Read daylight	E CX}	W CX	X3$ ]
saving time
Set DHCP on24	E 1 DH}	W1DH	Idh 1 ]
Set DHCP off24	E 0 DH}	W0DH	Idh 0 ]

NChanging DHCP from on to off also resets the IP address to the factory default (192.168.254.254).

View DHCP	E DH}	WDH	X% ]	X% = 0 (off) or 1 (on).
mode
Set IP address24	E X1$ CI}	W X1$ CI	Ipi• X1$ ]	X1$ = IP address (xxx.xxx.
				xxx.xxx). Leading zeros in
				each of the four fields are
				optional in setting values.

5-17