2.Connect the laptop or PC 10/100Mb Ethernet port configured for DHCP addressing to the available link-up port on the top enclosure in the rack using a standard CAT5 patch cable. A Windows PC automatically obtains an IP address. If no IP address is obtained, configure the PC Ethernet port for static addressing using the IP address 169.254.1.254 with a netmask of 255.255.0.0.

3.Open a web browser on the PC and enter the active Onboard Administrator module Service IP address found in the Enclosure Info screen in step 2.

4.Log into the Onboard Administrator. For more information on using Onboard Administrator, see the HP BladeSystem Onboard Administrator User Guide.

Cabling the network to the enclosure

Cable the interconnect modules to the enclosure. See "Mapping to interconnect ports (on page 48)" and the supporting documentation that came with your interconnect modules for specific details on cabling the interconnect modules.

Powering up the enclosure

Setting up AC power for the enclosure varies depending on whether you have a single-phase AC configuration or a three-phase AC configuration.

Single-phase AC configuration

Single-phase AC configuration

Cabling and powering up the enclosure 59

Page 59
Image 59
HP Doll c7000 manual Powering up the enclosure, Cabling the network to the enclosure, Single-phase AC configuration