b.Pull the handle, and slide the Onboard Administrator blank out of the Onboard Administrator tray.

2.Slide the Onboard Administrator module into the Onboard Administrator tray, and close the handle. When the Onboard Administrator module is fully inserted, it locks into place.

Attaching components to the HP c7000 Onboard Administrator with KVM

For local access to the enclosure:

1.Connect a monitor (1) to the VGA connector (6) on the HP Onboard Administrator with KVM.

2.Connect a USB hub (4) to the USB connector (5) on the HP Onboard Administrator with KVM.

Installation 45

Page 45
Image 45
HP Doll c7000 manual Installation