HP Doll c7000 manual Mapping half-height blades

Mapping half-height blades

The following table lists the available configurations for half-height devices installed in device bay N (1–16).

Connection	Port number	Connects to interconnect	Comments
		bay/port
Embedded NIC	NIC 1	1/Port N	One or two single-wide
	NIC 2	2/Port N	Ethernet interconnect modules
Mezzanine slot 1—1x or	1x/2x port 1	3/Port N	•	One single-wide
2x cards	1x/2x port 2	4/Port N		interconnect module
			• Four port cards will only
				connect the first two ports.
Mezzanine slot 1—4x	4x port 1	3/Port N	•	One double-wide
cards				interconnect module
			• Only port 1 of a two port
				card will be connected.
				Installation 49