10.If no errors are detected, the rear enclosure UID turns off, and the Insight Display screen illuminates green. Press the OK button to return to the Main Menu. Enclosure and blade hardware setup and configuration is complete.

If errors are detected, the Insight Display screen illuminates amber, and the Health Summary screen appears. For more information on troubleshooting configuration and installation errors, see Insight Display errors (on page 80).

IMPORTANT: If errors are detected, the Insight Display screen illuminates amber, and the Health Summary screen displays. For more information on troubleshooting configuration errors, see "Insight Display errors (on page 80)."

All configuration errors prevent the operation of the enclosure and should be corrected immediately.

11.Open a browser and connect to the active Onboard Administrator module using the Onboard Administrator IP address that was configured during the Insight Display installation wizard process.

12.Enter the user name and password from the tag supplied with the Onboard Administrator module to access the remote Onboard Administrator web interface and complete the Onboard Administrator first time installation wizard.

Navigating the Insight Display

Navigate through the menus and selections by using the arrow buttons on the Insight Display panel ("HP BladeSystem Insight Display components" on page 15). Use the arrow buttons to move the selection box to a menu item, and then press OK to go to selected screen.

HP BladeSystem Insight Display 69

Page 69
Image 69
HP Doll c7000 manual Navigating the Insight Display