HP Doll c7000 manual Mapping BL2x220c Blades

Connection	Port number	Connects to interconnect	Comments
		bay/port
NIC	NIC 1	1/Port N+8	One or two single-wide
	NIC 2	2/Port N+8	Ethernet interconnect modules
	NIC 3	1/Port N
	NIC 4	2/Port N
Mezzanine slot 1—1x or	1x/2x port 1	3/Port N	One or two single-wide
2x cards	1x/2x port 2	4/Port N	interconnect modules
	1x/2x port 3	3/Port N+8
	1x/2x port 4	4/Port N+8
Mezzanine slot 1—4x	4x port 1	3/Port N	• One double-wide
cards			interconnect module
			• Only port 1 of a two-port
			card can be connected
Mezzanine slot 2—1x or	1x/2x port 1	5/Port N	Up to four single-wide
2x cards	1x/2x port 2	6/Port N	interconnect modules
	1x/2x port 3	7/Port N
	1x/2x port 4	8/Port N
Mezzanine slot 2—4x	4x port 1	5/Port N	One or two double-wide
cards	4x port 2	7/Port N	interconnect modules
Mezzanine slot 3—1x or	1x/2x port 1	7/Port N+8	Up to four single-wide
2x cards	1x/2x port 2	8/Port N+8	interconnect modules
	1x/2x port 3	5/Port N+8
	1x/2x port 4	6/Port N+8
Mezzanine slot 3—4x	4x port 1	5/Port N+8	One or two double-wide
cards	4x port 2	7/Port N+8	interconnect modules

*Connectivity to interconnect bays 7 and 8 is only available with four-port mezzanine cards or port 2 of 4x card in Mezzanine slot 2.

Mapping BL2x220c Blades

To support network connections for specific signals, install an interconnect module in the bay corresponding to the embedded NIC or mezzanine signals.

Installation 51