Boot Sequence sets the first, second, third, and fourth booting devices. The system will try to boot from the first device but if it is not available, will try the next boot device. If you set the first boot device to LAN Boot, the system will boot from the LAN server first. The options are Hard Disk Drive, CD-ROM Drive, Floppy Disk Drive, and LAN Boot. The default setting is Floppy Disk Drive, Hard Disk Drive, CD- ROM Drive, then LAN Boot.

Note: If you set all booting options to the same device, then the computer will try to

boot from that device only.

5-12

Setup Configuration Utility

Page 87 Page 89
Page 88
Image 88
Motorola L3391, L3392 owner manual Boot from that device only
Page 87 Page 89
Top Page Image Contents