Motorola L3391, L3392 owner manual Setup Configuration Utility

Set Password allows you to set the password for your system. When typing password, first make usre that Num Lock is off, then type your password in the entry fields and press Enter. Confirm your password by typing it again and pressing Enter. If the Enable Password to Power-onsub-item is enabled, the set password is always required to boot the computer.

Hard Disk Boot Sector sets if a warning message will appear when the hard disk boot sector (partition table) has been changed. A check mark (ü) indicates enabled, while an underline (_) indicates disabled. The default setting is disabled.

CAUTION: sets this item to disabled before installing an operating system, running Fdisk or Format program. Otherwise, the intended action will fail.

5-10 Setup Configuration Utility