English

40

Boot sequence

To set the boot sequence in the BIOS utility, activate the BIOS utility, then select "Boot" from the categories listed at the top of the screen.

Disc to disc recovery enable

To enable disc to disc recovery (hard disc recovery), activate the BIOS utility, then select "Main" from the categories listed at the top of the screen. Find "D2D Recovery" at the bottom of the screen and use the F5/F6 keys to set this value to "Enabled".

Password

To set a password on boot, activate the BIOS utility, then select

"Security" from the categories listed at the top of the screen. Find "Password on boot:" and use the F5/F6 keys to enable this feature.

Using software

Playing DVD movies

When the DVD drive module is installed in the optical drive bay, you can play DVD movies on your computer.

1Eject the DVD tray and insert a DVD movie disc; then close the DVD tray.

Important! When you launch the DVD player for the first time, the program asks you to enter the region code. DVD discs are divided into 6 regions. Once your DVD drive is set to a region code, it will play DVD discs of that region only. You can set the region code a maximum of five times (including the first time), after which the last region code set will remain permanent. Recovering your hard disc does not reset the number of times the region code has been set. Refer to the table below for DVD movie region code information.

Page 50
Image 50
Acer 3000 manual Boot sequence, Disc to disc recovery enable, Password, Using software, Playing DVD movies