Overview

Overview

MFP configurations

Printer stand configuration

Note: Do not use a printer stand with a configured stack containing a 2000-sheet, high-capacity drawer.

Scanner

Scanner shelf

Printer

Duplex unit

Envelope drawer

500-sheet drawer

Printer stand

Scanner cabinet configuration

Note: Do not place a scanner shelf on top of a configured stack containing a 2000-sheet, high-capacity drawer.

Scanner

Scanner cabinet

2000-sheet drawer

Turning off the printer

If you are installing a scanner after initial printer setup, turn the printer off, and unplug the power cord from both the wall outlet and the printer or the 2000-sheet drawer. If you have other devices connected to the printer, turn them off as well, and unplug all power cords.

Note: Leave the printer and MFP in the box until you are ready to assemble them.

Selecting a location for your printer and MFP

CAUTION: The printer weighs 48–82 kg (105–181 lb). It requires at least three (3) people to lift it safely. Use the printer handholds to lift it, do not lift by the front of the printer, and make sure your fingers are not under the printer when you set it down.

When selecting a location for your printer and MFP option, you must leave enough room to open the printer trays, covers, doors, and MFP option. It is also important to:

Allow space around the printer for proper ventilation.

Provide a firm, level, and stable surface.

Overview

7

Page 7
Image 7
Lexmark 782n Overview, MFP configurations, Turning off the printer, Selecting a location for your printer and MFP