Step 11: Installing output options
Step 11: Installing output options
If you purchased an output option (output expander,
1Remove the top cover from the printer.
You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the output option.
2Remove the option from the box, and follow the installation setup instructions that came with the option.
3Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward.
1
2
The wire bail came with the printer and rests in the standard output bin when installed.
4Follow the instructions that came with the option to attach the plastic bracket to the output expander,
Step 11: Installing output options
21
