Lexmark 782n setup guide Installing an option-added firmware card

Step 12: Installing memory, option, or interface cards

Installing an “option-added” firmware card

Note: “Option-added” firmware cards designed for other Lexmark printers will not work with the printer.

1Remove the system board access cover from the back of the printer. (See Accessing the printer system board.) Note: If an “option-added” firmware card has already been installed, you must remove it.

2Unpack the “option-added” firmware card.

3Holding the card by its sides, align the pins on the card with the holes on the system board.

4Push the “option-added” firmware card firmly into place.

The entire length of the connector on the “option-added” firmware card must touch the system board and be locked into the connector.

Be careful not to damage the connectors.

Pins

Installing an “option-added” firmware card

24