Panasonic KX-TG2257PW, KX-TG2257S operating instructions Caller ID Number Auto Edit Feature

Using the Caller List

The Caller ID Number Auto Edit Feature

There are 3 patterns of phone number (a, b, and c, p. 41). This feature allows your phone to automatically edit an in-coming Caller ID number into one pattern you preferred, and display the Caller ID number with that pattern on the handset automatically.

After this feature is activated, Caller ID numbers coming from considered area codes (201, for example), from which the Caller ID numbers have been chosen to follow the desired pattern (7 digit pattern, for example), will be automatically edited from other patterns (11 digit pattern, for example) into the same pattern you have previously selected (which is 7 digit pattern, in the example).

Up to 4 area codes are allowed for this feature for pattern a and b (p. 41).

To activate this feature, you must 1) set this feature to on, and 2) make an out-going call from Caller List (p. 40) with a number which has one of 3 patterns that you have edited with considered area code, and that you prefer to be followed by future Caller ID numbers, so that in the future all the Caller ID numbers coming from the same area code will be displayed in the same pattern.

The Caller ID number Auto Edit feature is preset to ON at factory.

•If you fail to reach your destination when making the call, the phone number you dialed might have an incorrect pattern, please edit the phone number with another pattern (p. 41).

For example, if you move to another area, you may need to turn this feature to OFF to erase previously edited area codes. Then, if still need, you may activate this feature again.

Make sure the unit is not being used and the handset is lifted off the base unit.

1.Press (FUNCTION/2WAY!REC).

2.Scroll to “Program” by pressing Ö or Ñ and press á.

Ringer pattern HProgram

--------------

3.Scroll to “CallerID edit” by pressing Ö or Ñ.

4.Press á.

5.Select “On” or “Off” by pressing Ö or Ñ.

6.Press á (Save key).

•A beep sounds.

•To exit the programming mode, press (OFF).

Talk switching HCallerID edit

LCD contrast

•When the feature is set to OFF, the unit will still be able to display Caller ID, like regular Caller ID telephone, but the in-coming Caller ID number will not be edited by pattern and by area codes.

42