Panasonic KX-TG2257PW, KX-TG2257S Ringer Pattern, Scroll to Ringer pattern by pressing

Ringer Pattern

You can select the handset or the base unit ringer pattern out of 6 patterns. When an incoming call is being received, the unit rings in the selected pattern.

Your phone comes from the factory set to 1.

Make sure the unit is not being used and the handset is lifted off the base unit.

Preparation

With the handset

1	Press (FUNCTION/2WAY!REC).
2	Scroll to “Ringer pattern” by pressing
	Ö or Ñ.
3	Press á.
	•The current setting is displayed.
4	Select the desired ringer pattern by
	pressing Ö or Ñ.

•Each time you press Ö or Ñ, the ringer pattern will change and ring.

•You can also select the ringer pattern by pressing dialing buttons (1) to (6).

•If you set the ringer volume to OFF, the handset will not ring (p. 20).

Ringer volume HRinger pattern

Program

Ringer pattern :1

GF H=Save

Ringer pattern :3

GF H=Save

5 Press á (Save key).

•A beep sounds.

•To exit the programming mode, press (OFF).

Ringer pattern :3

•You can exit the programming mode any time by pressing (OFF).

With the base unit

1	Press (MUTE/RINGER).
	•The base unit rings at the current setting.
2	Within 5 seconds, select the desired ringer pattern by pressing
	dialing buttons (1) to (6).
	•Each time you press the buttons, the ringer pattern will change and ring.
			21
		For assistance, please call: 1-800-211-PANA(7262)