Panasonic KX-TG2257PW, KX-TG2257S operating instructions Day and Time

Preparing the Answering System

Day and Time

Voice Day/Time Stamp: During playback, a synthesized voice will announce the day and time that each message was recorded.

Make sure the unit is not being used and the handset is lifted off the base unit.

1

2

3

4

5

Press (FUNCTION/2WAY!REC).

Scroll to “Program” by pressing Ö or Ñ.

Press á.

Press á at “TAD program”.

Press á at “Day and time”.

•“Set time” is announced from the base unit.

If previously adjusted, the day/time will be heard.

Ringer pattern HProgram

--------------

--------------

HTAD program Set flash time

--------------

HDay and time

Remote code

SUN 12:00 AM #=Day 0-9=Time =AM/PM H=Save

6	Enter the current time (hour and minute)
	using a 4-digit number.
	(Ex. To set 9:30, enter “0930”.)
7	Press (*) to select “AM” or “PM”.
	Press (#) repeatedly to set the day.
8	Press á (Save key).
	•The base unit announces the day/time. The clock

starts working.

•If 6 beeps sound from the base unit, the setting is not correct. Start again from step 5.

•To exit the programming mode, press (OFF).

SUN 09:30 AM #=Day 0-9=Time =AM/PM H=Save

MON 09:30 AM #=Day 0-9=Time =AM/PM H=Save

MON 09:30 AM

•You can exit the programming mode any time by pressing (OFF).

•In step 6, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, and select “PM” by pressing (*).)

26