Advantech 5000 Series user manual Saving module’s Configuration to file

Software Utilities

When your system is connected with multiple ADAM-4000 or ADAM-5000 modules, just click the addresses of the modules to see relevant information (multiple selection from 00 to FF is allowed). Then check the Filter option and click Update button to see relevant information of the modules. Note that the information about other unselected modules won’t show forth.

5.1.7 Saving module’s Configuration to file

•Save the input range, baud rate, data format, checksum status and/ or integration time and Alarm Status for a specified analog input module.

•Save the output range, baud rate, data format, checksum status and slew rate for a specified analog output module.

•Save the baud rate and checksum status for a digital I/O module.

•Save the input mode, baud rate, checksum status and/or frequency gate time, input signal mode, gate mode, alarm status, etc. for a specified counter/frequency module.

There are three ways to save a configuration file:

1.Click the Toolbar button

2.Click the right mouse button

5-10 ADAM-5000