Advantech 5000 Series Installation Guideline 2.2 Module Installation ,

Installation Guideline
2.2 Module Installation
When inserting modules into the system, align the PC board of the
module with the grooves on the top and bottom of the system. Push
the module straight into the system until it is firmly seated in the
backplane connector. Once the module is inserted into the system, push
in the retaining clips (located at the top and bottom of the module) to
firmly secure the module to the system.
Figure 2-3 Module alignment and installation
2.3 I/O Slots and I/O channel Numbering
2-6
The ADAM-5000/485 system each provides 4 slots for use with I/O modules.
The I/O slots are numbered 0 thru 3, and the channel numbering of any I/O
module in any slot starts from 0. The ADAM-5000E sys tem each provides 8
slots for use with I/O modules. The slots are numbered 0 thru 7 . For
example, ADAM-5017 is a 8-channel analog input module, its channel
numbering is 0 thru 7.
ADAM-5000