Syntax $aaSiB | Advantech 5000 Series manual

$aaSiB

Name	Read Data Format
Description Returns the data format for a specified analog input
	module in a specified system.
Syntax	$aaSiB
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system you want to
	interrogate.
	Si identifies the I/O slot of the ADAM-5000 system
	containing the ADAM-5017H / 5017UH module you
	want to interrogate.
	B represents the read data format command.
	(cr) is the terminating character, carriage return (0Dh).
Response	!aaFFff(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error or communication error or if the specified address does not exist.

! delimiter character indicating a valid command was received.

? delimiter character indicating the command was invalid.

aa(range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

ffrepresents the 2-character hexadecimal code of the data format. 00 is for engineering unit format. 02 is for two’s complement format.

(cr) is the terminating character, carriage return (0Dh).

ADAM-5000

6-65