Advantech 5000 Series user manual

Chapter 6
$aaSiØ
Name Read Digital filter scale
Description Read the filter seconds to start to measure the input
signal.
Syntax $aaSiØ(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system which is to be calibrate.
Si identifies the I/O slot which is to be accessed.
Ø is the command for reading digital filter scale.
(cr) is the terminating character, carriage return (0Dh)
Response !aa(data)(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error or
communication error or if the specified address does not
exists.
! delimiter character indicating a valid command was
received.
? delimiter character indicating the command was
invalid.
aa (range 00-FF) represents the 2-character hexadecimal
address of an ADAM-5000 system.
(data)
represents filter secends from 8 µs~65000 µs. Be
aware that (data) has 5 characters.
(cr) is the terminating character, carriage return (0Dh)
ADAM-5000 6-133