Advantech 5000 Series user manual $aaSi9shhhh, Example command $07S29+0042cr

Command Set	5017/5018
	Analog Input

$aaSi9shhhh

Example command: $07S29+0042(cr)

response: !07(cr)

The command increases the CJC offset value of the analog input module in slot 2 of the system at address 07h with 66 counts (42 hex) which equals about 0.6°C.

Note: An analog input module requires a maximum of 2 seconds to perform auto calibration and ranging after it receives a CJC Calibration command. During this interval, the module cannot be addressed to perform any other actions.

6-56 ADAM-5000