Advantech 5000 Series user manual Example, $35S3A0000cr, 35cr

Chapter 6

$aaSiArrff

Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh)
Example	command:	$35S3A0000(cr)
	response:	!35(cr)
	The analog input module in slot 3 of the ADAM-5000
	system at address 35h is configured to an input range
	±15mV, engineering units data format, and integration
	time 50ms (60Hz).
	The response indicates that the command has been
	received.
Note:	An analog input module requires a maximum of 7
	seconds to perform auto calibration and ranging after it
	is reconfigured. During this time span, the module
	cannot be addressed to perform any other actions.

ADAM-5000 6-39