Advantech 5000 Series user manual Syntax $aaSiCj4cr

	Chapter 6
$aaSiCj4
Name	Start-Up Output Current/Voltage Configuration

Description Stores a default output value in a specified channel. The

	output value will take effect upon startup or reset.
Syntax	$aaSiCj4(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of the ADAM-5000 system.
	SiCj identifies the I/O slot i (i : 0 to 3) and the channel j (j
	: 0 to 3) of the module you want to set.
	4 is the Start-Up Output Current/Voltage Configuration
	command.
	(cr) is the terminating character, carriage return (0Dh)
Response	!aa(cr) if the command is valid.
	?aa(cr) if an invalid operation was entered.
	There is no response if the module detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	? delimiter character indicating the command was
	invalid.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	(cr) is the terminating character, carriage return (0Dh)

ADAM-5000 6-97