Chapter 6
Name Configuration
Description Sets the output range, data format and slew rate for a
specified channel of a specified analog output module in
a specified system.
Syntax $aaSiCjArrff(c r)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
address of the ADAM-5000 system you want to
configure.
SiCj identifies the I/O slot i (i : 0 to 3) and the channel
j (j : 0 to 3) of the module you want to configure.
A is I/O module configuration command.
rr represents the 2-character hexadecimal code of the
output range. (See Appendix B)
ff is a hexadecimal number that equals the 8-bit parame-
ter representing the status of data format and slew rate.
Bits 0 and 1 represent data format. Bits 2,3,4,5 represent
slew rate. The layout of the 8-bit parameter is shown in
Figure 6-4. The other bits are not used and are set to 0.
(cr) is the terminating character, carriage return (0Dh)
Figure 6-4 Data format for 8-bit parameters
ADAM-5000 6-91