Advantech 5000 Series Default Factory Settings, Configuration with the Adam Utility software

Quick Start Example

Default Factory Settings

Baud rate: 9600

Bits/sec. Address: 01 (hexadecimal)

The basic hook-up for system configuration is show below:

13-CHANNEL RTD INPUT

17-CHANNEL T/C INPUT

18-CHANNEL ANALOG INPUT

16-CHANNEL DIGITAL INPUT

14-CHANNEL ANALOG OUTPUT

16-CHANNEL RELAY OUTPUT

18-CHANNEL RELAY OUTPUT

16-CHANNEL DIGITAL OUTPUT

Figure A-2ADAM-5000 system hook-up and configuration

The following items are required to configure an ADAM-5000 system: a personal computer with RS-232 port (baud rate sent to 9600) and the ADAM utility software.

Configuration with the ADAM Utility software

The easiest way to configure the ADAM system is by using the ADAM utility software. The easy-to-use, menu driven software will guide you through every step of the configuration process. (See Chapter 5, Utility Software).

A-6 ADAM-5000