Command Set

5024 Analog Output

$aaSiCjB

Bits 0 and 1 represent data format. Bits 2, 3, 4 and 5 represent slew rate. The other bits are not used and are set to 0. (See Configuration command $aaSiCjArrff)

(cr) is the terminating character, carriage return (0Dh)

Example command: $24S1C1B

response: !243210

The analog output channel 1 in slot 1 of the ADAM- 5000 system at address 24h responds with an output range 0 to 10V, engineering units data format, and a slew rate of 1.0mA/sec.

6-94

ADAM-5000

Page 159
Image 159
Advantech 5000 Series user manual Analog Output, Example command $24S1C1B