Advantech 5000 Series user manual Set Alarm Disable/Latch

Chapter 6

$aaSiCjAhEs

Name	Set Alarm Disable/Latch
Description	The addressed counter module is instructed to set alarm
	disable or latch.
Syntax	$aaSiCjAhEs(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i and the desired channel j.
	AhEs is the command for setting Alarm Disable/Latch Mode
	command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	s indicates alarm enable/disable and can have the value
	D = Disable, E=Enable
	(cr) represents terminating character, carriage return (0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error or
	communication error or if the specified address does not
	exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	(cr) represents terminating character, carriage return (0Dh)

ADAM-5000 6-147